Lower Floor Vent; Windshield Vent; Accessory Power Outlet- Page 8

Lower Floor Vent

Windshield Vent

Accessory Power Outlet

Upper Floor Vent

Right Door Lever

Fan Switch

Heater Control

Window Latch

15

14

Hard Cab 

option

Hard Cab 

option

Hard Cab 

option

DOOR OPERATION

To enter the cab, pull the handle to open the door. 

Climb aboard your truck and close the door before 

you start the vehicle.
To exit, grab the door handle grip and slide it 

backward. Push the door to open. 
Close the doors after leaving the cab.

HEAT AND VENTILATION CONTROL

•  Set the fan switch to the desired speed.
• Adjust the Heater Control to increase or decrease the 

temperature in the cab.

You can use the fan switch to circulate air throughout 

the cab. The vents are fully adjustable and can be used 

to direct the air where you want it.

WINDSHIELD DEFOG AND DEFROSTING

Turn on the heater and fan switch, and adjust the vents 

to defog/defrost the windshield before you drive your 

truck.  Once the windshield is defrosted, use your 

windshield wiper to clear your windshield.  

USE YOUR TRUCK SAFELY

Do not open the door while the truck is moving. 

Head, arms, hands, legs or feet outside an open door 

could be crushed or even cut off whenever the truck 

is moving. Keep the door closed and 

stop the truck 

completely before getting off. 

You can be trapped or crushed by objects protruding 

or poking into the operator area. The heated cab glass 

will not stop a protruding object.  

Look where you are 

going.

Know the Hazards