17 Display; Note: ; Raise/Lower, Tilt & Accessories- Page 10

17 Display

Display

Raise/Lower, Tilt & Accessories

Raise/Lower, Tilt & Accessories   18

Know the Hazards

HYDRAULIC OPERATIONS CAN AFFECT STABILITY

Capacities shown on your capacity plate are with the 
mast vertical.  Be extra careful when tilting a load.  
(This also applies to other accessories or attachments 
your truck may have, such as sideshift, carton clamp,  
push-pull, etc.)

Raise/Lower lever (standard)

Tilt lever (standard)

Accessory lever (optional)

HYDRAULIC LEVER OPERATION 

Pull the lever toward you, away from the mast, and you'll 
get the action shown by the symbol in the top of the lever. 
Push the lever away from you, toward the mast, and you'll 
get the opposite action.

The farther you move the handle from neutral, the faster 
the action will be.

For example:  Pull the Raise/Lower lever toward 
you to raise the forks, as shown by the symbol. 
Push the lever away from you to lower the forks.

Note:  

The left side of each lever has a different shape, to 

help you identify the lever by feel.

TILT POSITION ASSIST OPTION

If your truck is equipped with this option, the forks will go 
to the programmed tilt position chosen by your company 
for this truck.

BATTERY CHARGE STATUS

The green bars show how much charge is left. 
Have the battery changed or recharged if the 
yellow light is fl ashing.

MESSAGE DISPLAY

Displays truck information such as: hours of 
operation, event codes along with instructions, 
battery charge and other data.

BATTERY RETAINER LIGHT (OPTION)

A red light will come on if the battery 

retainer is not properly installed. 

(BATTERY GATE OPEN 

displayed)

SEAT BELT LIGHT (OPTION)

A red light will come on if 

you do not have your seat 

belt fastened.

SERVICE & OPTION BUTTONS

See Service Manual for instructions.

PERFORMANCE SETTING

Indicates the level that your company has 
programmed this truck to operate at.

EVENT LIGHT (OPERATOR CORRECTABLE)

A  yellow light will come on when there is a 
detected event which the operator can correct.
See the message display for instructions.

SERVICE LIGHT (SERVICE REQUIRED)

A yellow light will come on when there is a 
detected event which requires service. Contact 
your supervisor or service department.