Move control handle to; brake position to stop truck.; Truck will coast- Page 11

Move control handle to
brake position to stop truck.

Truck will coast
if handle stays in drive
position when released.

Coast Controls 

optional

19   Coast Controls 

optional

COAST ON

Move the control handle to the coast position and shift

the coast selector lever toward the control arm.
With coast on, the truck will coast when you let go of

the control handle.  You must move the handle to a brake

position to apply the brake.

COAST OFF

Move the control handle down and shift the coast selector

away from the control arm.
When coast is disabled, braking will return to standard

operation (see page 15).

COAST, A WALKALONG CONTROL OPTION

You can use one of two optional coast controls to make

it easier to pick loads while walking short distances with

the truck.  This feature allows the truck to coast when

you let go of the control handle.  However you can apply

the brake by moving the control handle to one of the

brake positions.

Be even more careful when using coast.  Make sure you

understand the possible hazards.  Don't place yourself

or others at risk.

High travel speed is not available while coast is engaged.

OPTION 1, MANUAL COAST SELECTOR

Brake

  On

Brake On

Coast

Brake

  On

Brake On

Coast

Coast Controls 

optional

   20

Continued next page...

OPTION 2, ELECTRONIC QuickCoast

TM

 SELECTOR

COAST ON

Move the control handle to the coast position and press

the coast selector button on the back of the grab bar,

opposite the raise/lower switches.  The “no-brake” symbol

at the base of the control handle will light and a single

“beep” will sound to warn that the truck is in the coast

mode.
With coast on, the truck will coast when you let go of

the control handle.  You must move the handle to a brake

position to apply the brake.  A “beep” will continue to

sound as long as the handle is in the brake position.

COAST OFF

To turn coast off, either press the high travel speed button

on the grab bar, turn the key switch to OFF, or disconnect

the battery.  The “no-brake” symbol will go out, and the

control handle will return to vertical.
If you accidentally hit the reversing button when the

handle is in the coast position, coast is also disabled.
When coast is disabled, braking will return to standard

operation (see page 15).