Coast Controls ; Raising & Lowering; 21 Raising & Lowering- Page 12

Coast Controls 

optional

   22

Coast Controls 

optional

Raising & Lowering

21    Raising & Lowering

Brake
  On

Brake On

Coast

COAST, A WALKALONG CONTROL OPTION

You can use one of two optional coast controls to 
make it easier to pick loads while walking short 
distances with the truck. This feature allows the 
truck to coast when you let go of the control handle. 
However you can apply the brake by moving the 
control handle to one of the brake positions.

Be even more careful when using coast. Make sure you
understand the possible hazards. Don't place yourself
or others at risk.

High travel speed is not available while coast is 
engaged.

OPTION 1, MANUAL COAST SELECTOR

COAST ON

Move the control handle to the coast position and shift
the coast selector lever toward the control arm.

With coast on, the truck will coast when you let go of
the control handle. You must move the handle to a 
brake position to apply the brake.

COAST OFF

Move the control handle down and shift the coast 
selector away from the control arm.

When coast is disabled, braking will return to standard
operation (see page 16).

RAISE

Push either raise button until the forks are at the 
desired height.

LOWER

Push either lower button until the forks are at the 
desired height.