Sideshifter - 100mm ; Units of measure,- Page 8

Capacity Plate

13   Capacity Plate

SAMPLE

CAPACITY PLATE

The information
shown on this
sample plate does
not apply to your
truck.

A

B

CAUTION

You may not increase capacity if load
center is less than shown on your
capacity plate.

Note:  

ANSI B56.1 requires that all

data be shown first in Metric units and
then USA units.

OTHER LIFT HEIGHTS & LOAD CENTERS

Contact Crown for capacities at lift heights or load
centers not given on your capacity plate.

Capacity Plate   14

Know the Hazards

TRUCK WEIGHT

Dockboards, elevators and some floors have limited
capacity.  Check your capacity plate for the weight of your
truck.  Remember to add the weight of the load
you have on the forks.

TRUCK TYPE

Some truck types are not permitted in areas where there
are fire hazards.  Watch for marked areas.  

For example:

You must not drive a type E or ES truck into an area
restricted to EE or EX trucks.

ATTACHMENT DATA

If an attachment on your truck does not match the
information given here on your capacity plate, don't operate
your truck.  Your capacity plate may be wrong.  Report
the problem to your supervisor.

MAST COLLAPSED HEIGHT

Some work areas may have overhead obstructions.  Mast
Collapsed Height is the minimum height your truck can
clear, providing the backrest and load are lowered below
the top of the mast.

332-001E

RR

Serial Number

Attachment Data

Truck Weight with Max. Battery

Capacity with Mast Vertical

Load

Center

Units of measure,

kg/mm

(lb/in)

Capacity

Truck Type

Mast Collapsed Height

5200

S E R I E S

600

(24)

600

(24)

2260

(89)

3325

(7331)

E

1234-5678

600

(24)

Sideshifter - 100mm 

(4 in)

SAMPLE

CAPACITY PLATE INFORMATION

The capacity plate is on a console in the
operator area.  It contains:
• Serial number
• Capacity information (load, load center and lift height)
• Truck type (a fire safety rating)
• Truck weight with max. battery (does not include load)
• Attachment information (if any)
• Mast collapsed height

READING YOUR CAPACITY PLATE

Capacity may be reduced as lift height      increases.

For example:  On the sample plate, 2040kg (4500 lb) can
be lifted to 6350mm (250 in).  But above 6350 (250), to
7620 (300), capacity is reduced from 2040 (4500) to
1700 (3750).

Capacity is reduced as load center      increases.  If you
must handle loads with longer load centers, an additional
capacity plate will show the reduced capacities.

7620

(300)

1700

(3750)

2040

(4500)

6350

(250)