Left Header; Protect 0; Note: - Page 21

Left Header

Protect   0

Driving on Wire Guidance   20

Know the Hazards

FOR MANUAL STEERING

Take control of the steering handle, toggle the guidance switch OFF.

Note: 

Whenever guidance is OFF, the red light on the display will be on to remind

you that you are in manual steering.
If the wire sensing option is turned on, the red light will flash and the "beeping" will

speed up, to notify you that the truck senses a wire.

WHEN DRIVING ON THE WIRE

Watch where you're going. Make sure your path is clear.
Drive slowly and be alert for "beeps" from the alarm or changes in the display that 

signal changes in guidance status.

END OF AISLE CONTROL OPTION

With this feature, your employer can program your truck to either slow down or stop

automatically when it comes to the end of an aisle. You will hear a “beep” and the

indicator light will turn on.
Return the travel control to neutral, press the Override Switch and resume travel.

STAY ALERT

You must be just as careful and alert while driving on

guidance as you are when driving with manual steering.
• Start slowly and look where you're going.
• Always be prepared to steer manually.
• Make sure there is nothing in your path, on the floor  

  or sticking out of the racks.

LISTEN FOR THE "BEEP", CHECK THE DISPLAY

• Take control of the steering any time the red light is

  on, and check the display if you hear a "beep".