Steering & Travel; 15 Steering & Travel; Steering & Travel 16- Page 9

Steering & Travel

15  Steering & Travel

Steering & Travel   16

STEERING AT HIGH TRAVEL SPEED

When the travel speed switch is in the 

high travel speed position (     ), steering 

is set to 60˚ each way of center for smooth 

operation at higher travel speeds.

STEERING AT MANEUVER SPEED

When the travel speed switch is in the 

low travel speed position (     ), 90˚ of 

steering each way of center is available 

for maneuvering in confined spaces.

STEERING

You control steering by moving the control handle from side to side.

For example:  This picture shows the directions the truck can turn when the control 
handle is moved to the approximate position shown. 

STEERING WHILE WALKING OR COASTING

Anytime the operator is off the platform, steering is 

reduced to 15º each way of center.

Know the Hazards

POWER UNIT SWING

Be careful turning while traveling coupler end first.

The power unit will swing wide in the opposite 

direction. Make sure you have clearance, and watch 

out for people in the area.

Keep your hands and feet in the operator area.

Warning:  

Never place objects anywhere on the operator 

platform.  They would be a trip hazard and could 

affect truck speed and steering.

SLOW DOWN FOR SPILLS OR WET FLOORS

Powder or liquid spills can cause slippery floors.  

Slow down or you could lose control of steering and 

braking.  Be careful and allow for a longer stopping 

distance.

Don't run over objects on the floor.

Travel, power

unit first

Di

re

cti

on

of

 Tu

rn

Travel,

coupler first

Direct

ion

of Tu

rn