Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

Programming The Memory Feature

Linking And Unlinking The Remote Keyless Entry Transmitter To Memory

Linking And Unlinking The Remote Keyless Entry

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES
Page 215

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 215: Programming The Memory Feature
Programming The Memory Feature NOTE: Saving a new memory profile will erase an existing profile from memory. To create a new memory profile, perform the following: 1. Place the ignition into the RUN position. 2. Adjust
Page 216: Memory Position Recall
NOTE: Before programming your RKE transmitters you must select the “Memory To FOB” feature through the Uconnect® system screen. Refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information. To program your RKE transmitters,
Page 217: Easy Entry/Exit Seat (Available With Memory Seat Only)
NOTE: If the vehicle is equipped with Passive Entry, the memory settings will be recalled with a Passive Entry Unlock into the driver’s door using the Key Fob linked to position 1. To recall the
Page 218: TO OPEN AND CLOSE THE HOOD
forward of the rear stop. The seat will return to its previously set position when you place the ignition into the ACC or RUN position. • When you remove the Key Fob from the
Page 219: Hood Release Lever
2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. CAUTION! To prevent possible damage,

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Place the ignition into the RUN position.
  • 2. Adjust all memory profile settings to desired prefer- ences (i.
  • 3. Press and release the SET (S) button on the memory switch.
  • 4. Within five seconds, press and release the MEMORY button 1 or 2.
  • Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile.
  • The Recall Memory with Remote Key Unlock feature can be turned on and off using the Uconnect® System, refer to “Uconnect® Settings” in “Understanding Your Instrument Panel” for further information.