Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

Sealing A Tire With TIREFIT

(A) Whenever You Stop To Use TIREFIT:

(B) Setting Up To Use TIREFIT:

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES
Page 498

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 498: Sealing A Tire With TIREFIT
WARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of an allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of chil- dren. If swallowed, rinse mouth immediately with plenty of water
Page 499: (C) Injecting TIREFIT Sealant Into The Deflated Tire:
5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 Volt power outlet. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire. (C) Injecting TIREFIT Sealant Into
Page 500: Sealant Hose (6):
NOTE: If the Mode Select Knob (5) is on Air Mode and the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant
Page 501: (D) Drive Vehicle:
3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location.
Page 502: (E) After Driving:
(E) After Driving: Pull over to a safe location. Refer to “Whenever You Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2.

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers.
  • 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground.
  • 3. Place the transmission in PARK (auto transmission) or in Gear (manual transmission) and turn Off the ignition.
  • 4. Set the parking brake.
  • 1. Push in the Mode Select Knob (5) and turn to the Sealant Mode position.
  • 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose.
  • 3. Place the TIREFIT kit flat on the ground next to the deflated tire.
  • 4. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose (6) onto the valve stem.
  • TIREFIT Sealant solution contains latex.