Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

(C) Injecting TIREFIT Sealant Into The Deflated Tire:

If the sealant (white fluid) does not flow within 0 – 10

seconds through the Sealant Hose (6):

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES
Page 499

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 499: (C) Injecting TIREFIT Sealant Into The Deflated Tire:
5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 Volt power outlet. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire. (C) Injecting TIREFIT Sealant Into
Page 500: Sealant Hose (6):
NOTE: If the Mode Select Knob (5) is on Air Mode and the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant
Page 501: (D) Drive Vehicle:
3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location.
Page 502: (E) After Driving:
(E) After Driving: Pull over to a safe location. Refer to “Whenever You Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2.
Page 503: (F) Sealant Bottle And Hose Replacement:
5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced,

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 5. Uncoil the Power Plug (8) and insert the plug into the vehicle’s 12 Volt power outlet.
  • 1. Press the Power Button (4) to turn Off the TIREFIT kit.
  • 2. Connect the Power Plug (8) to a different 12 Volt power outlet in your vehicle or another vehicle, if available.
  • 3. The Sealant Bottle (1) may be empty due to previous use.
  • Always start the engine before turning ON the TIRE- FIT kit.
  • After pressing the Power Button (4), the sealant (white fluid) will flow from the Sealant Bottle (1) through the Sealant Hose (6) and into the tire.