Fresh Manuals
Brands
Dodge
Automobiles
Charger

2014 Dodge Charger SRT Owner Manual

Sealant Hose (6):

If the sealant (white fluid) does flow through the

If the tire does not inflate to at least 26 psi (1.8 Bar)

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
Child Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
MAINTENANCE PROCEDURES
Page 500

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 500: Sealant Hose (6):
NOTE: If the Mode Select Knob (5) is on Air Mode and the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant
Page 501: (D) Drive Vehicle:
3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location.
Page 502: (E) After Driving:
(E) After Driving: Pull over to a safe location. Refer to “Whenever You Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2.
Page 503: (F) Sealant Bottle And Hose Replacement:
5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced,
Page 504: JUMP-STARTING PROCEDURES
JUMP-STARTING PROCEDURES If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds).
  • 4.8 Bar).
  • 4.8 Bar) to the actual tire pressure when the Sealant Bottle (1) is empty.
  • 2. The pump will start to inject air into the tire immedi- ately after the Sealant Bottle (1) is empty.
  • 1.8 Bar) pressure within 15 minutes: • The tire is too badly damaged.
  • 1.8 Bar) pressure within 15 minutes: 1.
  • 2. Remove the Speed Limit sticker from the top of the Sealant Bottle (1) and place the sticker on the instru- ment panel.
  • The tire is too badly damaged.