2014 Dodge Charger SRT Owner Manual
(D) Drive Vehicle:
The metal end fitting from Power Plug (8) may get
hot after use, so it should be handled carefully.
Table of Contents
Detailed Information for 2014 Dodge Charger SRT Owner Manual
Summary of Contents for 2014 Dodge Charger SRT Owner Manual
Page 501: (D) Drive Vehicle:
3. Immediately disconnect the Sealant Hose (6) from the
valve stem, reinstall the cap on the fitting at the end of
the hose, and place the TIREFIT kit in the vehicle
storage location.
Page 502: (E) After Driving:
(E) After Driving:
Pull over to a safe location. Refer to “Whenever You Stop
to Use TIREFIT” before continuing.
1. Push in the Mode Select Knob (5) and turn to the Air
Mode position.
2.
Page 503: (F) Sealant Bottle And Hose Replacement:
5. Replace the Sealant Bottle (1) and Sealant Hose (6)
assembly at your authorized dealer as soon as pos-
sible. Refer to (F) “Sealant Bottle and Hose Replace-
ment”.
NOTE:
When having the tire serviced,
Page 504: JUMP-STARTING PROCEDURES
JUMP-STARTING PROCEDURES
If your vehicle has a discharged battery it can be jump-
started using a set of jumper cables and a battery in
another vehicle or by using a portable battery booster
pack.
Page 505: Remote Battery Post Locations
WARNING!
•
Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is ON. You can be injured by
moving fan blades.
•
Remove any metal
Lists of information found in 2014 Dodge Charger SRT Owner Manual
- 3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location.
- The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully.
- Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant con- tacting your skin, clothing, and the vehicle’s inte- rior.
All trademarks are property of their respective owners. Tightrope
Interactive