2014 Dodge Charger SRT Owner Manual

Jump-Starting Procedure

Connecting The Jumper Cables

Do not allow vehicles to touch each other as this

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
Page 506

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 506: Jump-Starting Procedure
3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. WARNING! Do not allow vehicles to
Page 507: Disconnecting The Jumper Cables
WARNING! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting electri- cal spark could cause the battery to explode and could result in personal injury. Only
Page 508: FREEING A STUCK VEHICLE
CAUTION! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough without engine operation, the vehicle’s battery
Page 509: SHIFT LEVER OVERRIDE
CAUTION! • When “rocking” a stuck vehicle by shifting be- tween DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the
Page 510: Shift Lever Override
5. Insert a screwdriver or similar tool into the access port (in the left side of the storage bin), and push and hold the override release lever in. 6. Move the shift lever

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF.
  • 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the vehicle with the dis- charged battery.
  • 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery.
  • 3. Connect the negative (-) end of the jumper cable to the negative (-) post of the booster battery.
  • 4. Connect the opposite end of the negative (-) jumper cable to the remote negative (-) post of the vehicle with the discharged battery.