2014 Dodge Charger SRT Owner Manual

Backup Lamps

Fastener Cover

A transient high voltage occurs at the bulb sockets of

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
OCCUPANT RESTRAINTS
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Uconnect® PHONE (4.3)
Uconnect® PHONE (8.4/8.4N)
UNDERSTANDING YOUR INSTRUMENT PANEL
STARTING AND OPERATING
MAINTAINING YOUR VEHICLE
Page 568

Detailed Information for 2014 Dodge Charger SRT Owner Manual

Summary of Contents for 2014 Dodge Charger SRT Owner Manual

Page 568: Backup Lamps
WARNING! A transient high voltage occurs at the bulb sockets of HID headlamps when the headlight switch is turned ON. It may cause serious electrical shock or electro- cution if not serviced properly. See
Page 569: License Lamp
License Lamp 1. Remove the screws securing the lamp to the rear fascia. 2. Remove the bulb and socket assembly. 3. Disconnect the bulb from the socket assembly and install the replacement bulb. 4. Reinstall the
Page 570: FLUID CAPACITIES
FLUID CAPACITIES U.S. Metric Fuel (Approximate) 19 Gallons 72 Liters Engine Oil With Filter 6.4 Liter Engine (SAE 0W-40, Synthetic API Certified) 7 Quarts 6.6 Liters Cooling System * 6.4 Liter Engine (MOPAR Antifreeze/Engine Coolant (OAT coolant conforming to MS-12106) 10 Year/150,000
Page 571: FLUIDS, LUBRICANTS AND GENUINE PARTS
FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS-12106). Engine Oil For best performance and maximum protection under all types
Page 572: Chassis
Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the function or perfor- mance of your transmission. We recommend MOPAR® ATF+4® fluid. Brake Master Cylinder We

Lists of information found in 2014 Dodge Charger SRT Owner Manual

  • 1. Open trunk.
  • 2. Remove fastener from cover.
  • 3. Remove cover.
  • 4. Twist the bulb one quarter turn to remove.
  • 5. Reinstall new bulb.
  • 6. Install cover and fastener.