Center Seat LATCH; To Install A LATCH-Compatible Child Restraint; This vehicle does not have a center seating position.- Page 263

2018 Jeep Wrangler JK Owner Manual

Table of Contents

GETTING TO KNOW YOUR VEHICLE
GETTING TO KNOW YOUR INSTRUMENT PANEL
SAFETY
OCCUPANT RESTRAINT SYSTEMS
STARTING AND OPERATING
SERVICING AND MAINTENANCE
MULTIMEDIA
UCONNECT PHONE — IF EQUIPPED
background image

Center Seat LATCH

Two-Door Models:

WARNING!

This vehicle does not have a center seating position.
Do not use the center lower LATCH anchorages to
install a child seat in the center of the back seat.

Four-Door Models:

Do not install child restraints with rigid lower attachments

in the center seating position. Only install this type of child

restraint in the outboard seating positions. Child restraints

with flexible, webbing mounted lower attachments can be

installed in any rear seating position.

WARNING!

Never use the same lower anchorage to attach more
than one child restraint. If you are installing LATCH-
compatible child restraints next to each other, you must
use the seat belt for the center position. You can then
use either the LATCH anchors or the vehicle’s seat belt
for installing child seats in the outboard positions.

(Continued)

WARNING!

(Continued)

Please refer to “Installing The LATCH-Compatible
Child Restraint System” for typical installation in-
structions.

Always follow the directions of the child restraint manu-
facturer when installing your child restraint. Not all child
restraint systems will be installed as described here.

To Install A LATCH-Compatible Child Restraint

If the selected seating position has a Switchable Automatic

Locking Retractor (ALR) seat belt, stow the seat belt,

following the instructions below. See the section “Installing

Child Restraints Using the Vehicle Seat Belt” to check what

type of seat belt each seating position has.
1. Loosen the adjusters on the lower straps and on the

tether strap of the child seat so that you can more easily

attach the hooks or connectors to the vehicle anchor-

ages.

2. Place the child seat between the lower anchorages for

that seating position. For some second row seats, you

may need to recline the seat and / or raise the head

restraint to get a better fit. If the rear seat can be moved

forward and rearward in the vehicle, you may wish to

5

SAFETY

261

Detailed Information for 2018 Jeep Wrangler JK Owner Manual

Lists of information found in 2018 Jeep Wrangler JK Owner Manual - Page 263

  • 1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchor- ages.
  • 2. Place the child seat between the lower anchorages for that seating position.

Related Documents for 2018 Jeep Wrangler JK Owner Manual