Hinge Pin Screw; Door Strap/Harness Location; GETTING TO KNOW YOUR VEHICLE- Page 34
2018 Jeep Wrangler JK Owner Manual
Table of Contents
1. Roll down the glass window to prevent any damage.
2. Remove the hinge pin screws from the upper and lower
outside hinges (using a #T50 Torx head driver).
NOTE:
The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear loadfloor.
3. Unplug the wiring harness connector under the instru-
ment panel by pushing the tab at the base of the
connector and pulling down to disconnect.
Hinge Pin Screw
Door Strap/Harness Location
1 — Wiring Harness (follow the harness up and under the instru-
ment panel to the connector)
2 — Body Hook
3 — Door/Harness Strap
32
GETTING TO KNOW YOUR VEHICLE
Detailed Information for 2018 Jeep Wrangler JK Owner Manual
Lists of information found in 2018 Jeep Wrangler JK Owner Manual - Page 34
- 1. Roll down the glass window to prevent any damage.
- 2. Remove the hinge pin screws from the upper and lower outside hinges (using a #T50 Torx head driver).
- 3. Unplug the wiring harness connector under the instru- ment panel by pushing the tab at the base of the connector and pulling down to disconnect.
Related Documents for 2018 Jeep Wrangler JK Owner Manual
All trademarks are property of their respective owners. Tightrope
Interactive