If Equipped; Warning Light; Active Warning Light — If Equipped- Page 78

2018 Jeep Wrangler JL User Guide

Table of Contents

background image

WARNING!

If you continue operating the vehicle when
the Transmission Temperature Warning
Light is illuminated you could cause the
fluid to boil over, come in contact with hot
engine or exhaust components and cause
a fire.

CAUTION!

Continuous driving with the Transmission
Temperature Warning Light illuminated
will eventually cause severe transmission
damage or transmission failure.

— Vehicle Security Warning Light —

If Equipped

This light will flash at a fast rate for approxi-
mately 15 seconds when the vehicle security
alarm is arming, and then will flash slowly
until the vehicle is disarmed.

Yellow Warning Lights

— Anti-Lock Brake (ABS)

Warning Light

This warning light monitors the Anti-Lock
Brake System (ABS). The light will turn on
when the ignition is placed in the ON/RUN or
ACC/ON/RUN position and may stay on for as
long as four seconds.

If the ABS light remains on or turns on while
driving, then the Anti-Lock portion of the
brake system is not functioning and service is
required as soon as possible. However, the
conventional brake system will continue to
operate normally, assuming the Brake Warn-
ing Light is not also on.

If the ABS light does not turn on when the
ignition is placed in the ON/RUN or ACC/ON/
RUN position, have the brake system in-
spected by an authorized dealer.

— Electronic Stability Control (ESC)

Active Warning Light — If Equipped

This warning light will indicate when the
Electronic Stability Control system is Active.

The “ESC Indicator Light” in the instrument
cluster will come on when the ignition is
placed in the ON/RUN or ACC/ON/RUN posi-
tion, and when ESC is activated. It should go
out with the engine running. If the “ESC
Indicator Light” comes on continuously with
the engine running, a malfunction has been
detected in the ESC system. If this warning
light remains on after several ignition cycles,
and the vehicle has been driven several miles
(kilometers) at speeds greater than 30 mph
(48 km/h), see an authorized dealer as soon
as possible to have the problem diagnosed
and corrected.

• The “ESC Off Indicator Light” and the

“ESC Indicator Light” come on momen-
tarily each time the ignition is placed in the
ON/RUN or ACC/ON/RUN position.

• The ESC system will make buzzing or click-

ing sounds when it is active. This is normal;
the sounds will stop when ESC becomes
inactive.

• This light will come on when the vehicle is

in an ESC event.

GETTING

TO

KNOW

YOUR

INSTRUMENT

P

ANEL

76

Detailed Information for 2018 Jeep Wrangler JL User Guide

Lists of information found in 2018 Jeep Wrangler JL User Guide - Page 78

  • The “ESC Off Indicator Light” and the “ESC Indicator Light” come on momen- tarily each time the ignition is placed in the ON/RUN or ACC/ON/RUN position.
  • The ESC system will make buzzing or click- ing sounds when it is active.
  • This light will come on when the vehicle is in an ESC event.

Related Documents for 2018 Jeep Wrangler JL User Guide