9. TIRES; [1] TIRES; Inflation Pressure- Page 102

GENERAL

L3560, L4060, L4760, L5060, L5460, L6060, WSM

G-73

9. TIRES

[1] TIRES

 CAUTION

To avoid personal injury:

• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper

equipment.

• Always maintain the correct tire pressure.

Do not inflate tires above the recommended pressure shown in the operator's manual.
IMPORTANT

• Do not use tires other than those approved by KUBOTA.

9Y1210824GEG0117US0

Inflation Pressure

Though the tire pressure is factory-set to the prescribed level, it

naturally drops slowly in the course of time. Thus, check it everyday

and inflate as necessary.

NOTE

• Maintain the maximum pressure in front tires, if using a

front loader or when equipped with a full load of front
weights.

9Y1210824GEG0118US0

Tire sizes

Inflation pressure

Rear

12.4-24, 4PR

140 kPa (1.4 kgf/cm

2

, 20 psi)

14.9-24, 4PR

140 kPa (1.4 kgf/cm

2

, 20 psi)

14.9-26, 4PR

140 kPa (1.4 kgf/cm

2

, 20 psi)

355/80-D20, 4PR

100 kPa (1.0 kgf/cm

2

, 14 psi)

44 × 18-20, 6PR

170 kPa (1.7 kgf/cm

2

, 24 psi)

Front

7.2-16, 4PR

150 kPa (1.5 kgf/cm

2

, 22 psi)

8.3-16, 4PR

150 kPa (1.5 kgf/cm

2

, 22 psi)

9.5-16, 4PR

205 kPa (2.1 kgf/cm

2

, 30 psi)

27 × 8.50-15, 4PR

85 kPa (8.5 kgf/cm

2

, 12 psi)

29 × 12.50-15, 4PR

140 kPa (1.4 kgf/cm

2

, 20 psi)

KiSC issued 03, 2016 A