[3] DPF REGENERATION SYSTEM (Default Version); (1) Regeneration Mode (Default Version); Inhibit Mode- Page 141

ENGINE

L3560, L4060, L4760, L5060, L5460, L6060, WSM

1-M26

Inhibit Mode



 : Blink, 



 : ON

9Y1210824ENM0061US0

[3]  DPF REGENERATION SYSTEM (Default Version)

(1)  Regeneration Mode (Default Version)

DPF regeneration process can be performed by choosing from "Auto Regeneration" or "Regeneration inhibit"

mode according to your job conditions. For jobs not affected by hot gases emitted during regeneration, the "Auto

Regeneration" is advisable.



Auto Regeneration Mode

When  starting  the  engine  (switch  operation  is  unnecessary),  the  "Auto  Regeneration"  mode  is  automatically

activated.

With the auto regeneration mode on, when a specific amount of PM has accumulated, and the regeneration

conditions are satisfied (See the "Tips on Diesel Particulate Filter [DPF] Regeneration"), the DPF will be automatically

regenerated whether the tractor is in motion or parked.

By this way, work efficiency is improved. For details of auto regeneration, refer to "Operating Procedure for Auto

Regeneration Mode" section.



Inhibit Mode

After starting the engine, if the "DPF INHIBIT switch" is pressed to turn on the switch lamp, the "Regeneration

inhibit" mode will be activated.

With "Regeneration Inhibit" mode on, the PM which has accumulated inside the DPF will not be burnt, unless the

operator performs the regeneration work manually.

The "Regeneration Inhibit" mode is effective for work in poorly ventilated work spaces. 

For details of regeneration prohibition, refer to "Operating Procedure for Regeneration Inhibit Mode" section.

NOTE

• If stop the engine once, the "Auto Regeneration" mode will be activated.

9Y1210824ENM0063US0

Warning 

level

Buzzer

Engine 

output 

limitation

Remark

Level 0

No

No 

limitation

Normal operation, Regeneration is not required.

Level 1

No

No 

limitation



Regeneration is required, but Auto Regeneration is not 

possible.

Level 2-1: Every 5 

seconds

Level 2-2: Every 3 

seconds.

No 

limitation





Regeneration is required, but Auto Regeneration is not 

possible. Condition for Parked Regeneration is not satisfied.







Condition for Parked Regeneration is satisfied. When 

pressing the parked regeneration switch, Parked 

Regeneration will start.





Under the Parked Regeneration.

Level 3

Every 

second

50 %





Condition for Parked Regeneration is not satisfied.







Condition for Parked Regeneration is satisfied. When 

pressing the parked regeneration switch, Parked 

Regeneration will start.







Under the Parked Regeneration.

Level 4

Every 

second

50 %



Without diagmaster.

Same with level 3



When using diagmaster and selecting the Parked 

Regeneration command.

Level 5

Every 

second

50 %



Even when using diagmaster, it is not possible to carry out 

Parked Regeneration.

KiSC issued 03, 2016 A