Engine Oil: ; Transmission Oil: ; Proper SAE Engine Oil according to the ambient temperatures as shown above.- Page 39

GENERAL

L3560, L4060, L4760, L5060, L5460, L6060, WSM

G-10

NOTE

Engine Oil: 

• Oil used in the engine should have an American Petroleum Institute (API) service classification and

Proper SAE Engine Oil according to the ambient temperatures as shown above.

• Refer to the following table for the suitable API classification engine oil according to the engine type (with

DPF (Diesel Particulate FIlter) type engines) and the fuel.

Fuel:

• Use the ultra low sulfur diesel fuel only [below 0.0015 % (15 ppm)] for these engines.
• Cetane number of 45 minimum. Cetane number greater than 50 is preferred, especially for temperatures

below 

−

20 °C (

−

4 °F) or elevations above 1500 m (5000 ft).

• Diesel fuels specified to EN 590 or ASTM D975 are recommended.
• No.2-D is a distillate fuel of lower volatility for engines in industrial and heavy mobile service. (SAE J313

JUN87).

Transmission Oil: 

*KUBOTA Super UDT-2: For an enhanced ownership experience, we highly recommend Super UDT-2 to be used

instead of standard hydraulic/transmission fluid.

Super UDT-2 is a proprietary KUBOTA formulation that deliveries superior performance and protection in all

operating conditions.

Regular UDT is also permitted for use in this machine.

• Indicated capacities of water and oil are manufacturer's estimate.

9Y1210824GEG0005US0

Fuel used

Engine oil classification (API classification)

Oil class of engines with DPF

Ultra Low Sulfur Fuel [< 0.0015 % (15 ppm)]

CJ-4

KiSC issued 03, 2016 A