2004 Mazda B Series; Owners Guide (post-2002-fmt); Checking automatic transmission fluid (if equipped)- Page 223

2004 Mazda B3000 Truck B Series Owners Manual2

Model Year
2014 Dodge Charger SRT Owner Manual
background image

TRANSMISSION FLUID

Checking automatic transmission fluid (if equipped)

Refer to your service maintenance section for scheduled intervals for
fluid checks and changes. Your transmission does not consume fluid.
However, the fluid level should be checked if the transmission is not
working properly, i.e., if the transmission slips or shifts slowly or if you
notice some sign of fluid leakage.

Automatic transmission fluid expands when warmed. To obtain an
accurate fluid check, drive the vehicle until it is at normal operating
temperature (approximately 30 km [20 miles]). If your vehicle has been
operated for an extended period at high speeds, in city traffic during hot
weather or pulling a trailer, the vehicle should be turned off for about 30
minutes to allow fluid to cool before checking.

Refer to your

Service Maintenance Section

for scheduled check and

change intervals.

Transmission does not consume fluid.

Check fluid when transmission is not operating properly or if you see
a leak.

Fluid level must be checked at normal operating temperature, 30 km
(20 miles) of driving.

DO NOT ADD fluid until the transmission is at normal operating
temperatures or the transmission will be overfilled.

To check and add fluid:

1. Drive the vehicle 30 km (20 miles) to reach normal operating

temperatures.

If vehicle was driven in hot weather, city traffic, pulling a trailer, allow
transmission to cool for 30 minutes before checking.

2. Engage parking brake, start engine.

3. Put your foot on the brake pedal and move the gearshift lever slowly

through all of the gear ranges.

4. Shift to P (Park) and leave the engine running.

5. Remove the dipstick, wipe clean with a dry lint free rag.

6. Install and fully seat the dipstick into the filler tube.

2004 Mazda B Series

(mbs)

Owners Guide (post-2002-fmt)
USA English

(fus)

Maintenance and Specifications

223

Detailed Information for 2004 Mazda B3000 Truck B Series Owners Manual2

Lists of information found in 2004 Mazda B3000 Truck B Series Owners Manual2 - Page 223

  • 1. Drive the vehicle 30 km (20 miles) to reach normal operating temperatures.
  • 2. Engage parking brake, start engine.
  • 3. Put your foot on the brake pedal and move the gearshift lever slowly through all of the gear ranges.
  • 4. Shift to P (Park) and leave the engine running.
  • 5. Remove the dipstick, wipe clean with a dry lint free rag.
  • 6. Install and fully seat the dipstick into the filler tube.
  • Refer to your Service Maintenance Section for scheduled check and change intervals.
  • Transmission does not consume fluid.
  • Check fluid when transmission is not operating properly or if you see a leak.
  • Fluid level must be checked at normal operating temperature, 30 km (20 miles) of driving.
  • DO NOT ADD fluid until the transmission is at normal operating temperatures or the transmission will be overfilled.
  • If vehicle was driven in hot weather, city traffic, pulling a trailer, allow transmission to cool for 30 minutes before checking.

Related Documents for 2004 Mazda B3000 Truck B Series Owners Manual2