Owners Guide (post-2002-fmt); Handle a halogen headlamp bulb carefully and keep out of; children’s reach. Grasp the bulb only by its plastic base and do- Page 51

2007 Mazda B3000 Truck Mazda B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

To remove the headlamp bulb:
1. Make sure headlamp switch is in OFF position, then open the hood.

2. Reach behind the lamp assembly for access and disconnect the

electrical connector.

3. Locate the bulb retaining ring

behind the headlamp assembly.

4. Remove the bulb retaining ring

by turning it counterclockwise

and remove the old bulb by

gently pulling it straight back

out of the lamp assembly. Keep

the retaining ring to retain the

new bulb.

To install the new bulb:

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hands could cause the bulb

to break the next time the headlamps are operated. Always wear

safety glasses while handling bulbs.
NOTE

: If the bulb is accidentally touched, it should be cleaned with

rubbing alcohol before being used.

1. With the flat side of the bulb’s plastic base facing upward, insert the

glass end of the bulb into the lamp assembly. You may need to turn

the bulb left or right to align the grooves in the plastic base with the

tabs in the lamp assembly. When the grooves are aligned, push the

bulb into the lamp assembly until the plastic base contacts the rear

of the lamp assembly.

2007 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

51

Detailed Information for 2007 Mazda B3000 Truck Mazda B Series Owners Manual

Lists of information found in 2007 Mazda B3000 Truck Mazda B Series Owners Manual - Page 51

  • 1. Make sure headlamp switch is in OFF position, then open the hood.
  • 2. Reach behind the lamp assembly for access and disconnect the electrical connector.
  • 3. Locate the bulb retaining ring behind the headlamp assembly.
  • 4. Remove the bulb retaining ring by turning it counterclockwise and remove the old bulb by gently pulling it straight back out of the lamp assembly.
  • 1. With the flat side of the bulb’s plastic base facing upward, insert the glass end of the bulb into the lamp assembly.

Related Documents for 2007 Mazda B3000 Truck Mazda B Series Owners Manual