Owners Guide (post-2002-fmt); How does the Personal Safety System; Driver and passenger dual-stage airbag supplemental restraints- Page 75

2007 Mazda B3000 Truck Mazda B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

Passenger Airbag Off indicator light.

Restraints Control Module (RCM) with impact and safing sensors.

Restraint system warning light and back-up tone.

The electrical wiring for the airbags, crash sensor(s), safety belt

pretensioners, front safety belt usage sensors, driver seat position

sensor, and indicator lights.

How does the Personal Safety System

work?

The Personal Safety System

can adapt the deployment strategy of your

vehicle’s safety devices according to crash severity and occupant

classification and conditions. A collection of crash and occupant sensors

provides information to the Restraints Control Module (RCM). During a

crash, the RCM activates the safety belt pretensioners and/or either

none, one, or both stages of the dual-stage airbag supplemental restraints

based on crash severity and occupant classification and conditions.
The fact that the pretensioners or airbags did not activate for both front

seat occupants in a collision does not mean that something is wrong with

the system. Rather, it means the Personal Safety System

determined

the accident conditions (crash severity, belt usage, etc.) were not

appropriate to activate these safety devices. Front airbags and

pretensioners are designed to activate only in frontal and near-frontal

collisions, not rollovers, side-impacts, or rear-impacts unless the collision

causes sufficient longitudinal deceleration.

Driver and passenger dual-stage airbag supplemental restraints

The dual-stage airbags offer the capability to tailor the level of airbag

inflation energy. A lower, less forceful energy level is provided for more

common, moderate-severity impacts. A higher energy level is used for

the most severe impacts. Refer to

Airbag Supplemental Restraints

section in this chapter.

Front crash severity sensor

The front crash severity sensor enhances the ability to detect the

severity of an impact. Positioned up front, it provides valuable

information early in the crash event on the severity of the impact. This

allows your Personal Safety System

to distinguish between different

levels of crash severity and modify the deployment strategy of the

dual-stage airbags and safety belt pretensioners.

2007 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

75

Detailed Information for 2007 Mazda B3000 Truck Mazda B Series Owners Manual

Lists of information found in 2007 Mazda B3000 Truck Mazda B Series Owners Manual - Page 75

  • Passenger Airbag Off indicator light.
  • Restraints Control Module (RCM) with impact and safing sensors.
  • Restraint system warning light and back-up tone.
  • The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, and indicator lights.

FAQ (Frequently Asked Questions) for 2007 Mazda B3000 Truck Mazda B Series Owners Manual - Page 75

  • • Passenger Airbag Off indicator light. • Restraints Control Module (RCM) with impact and safing sensors. • Restraint system warning light and back-up tone. • The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, and indicator lights. How does the Personal Safety System 姟 work?

Related Documents for 2007 Mazda B3000 Truck Mazda B Series Owners Manual