Foglight Bulb Replacement; To install a bulb:- Page 349

Maintenance

8-51

t

To install a bulb:

1. With the flat side of the bulb’s plastic

base facing upward, insert the glass
end of the bulb into the light assembly.
You may need to turn the bulb left or
right to line up the grooves in the plas-
tic base with the tabs in the light
assembly. When the grooves are
aligned, push the bulb into the socket
until the plastic base contacts the rear
of the light assembly. 

2. Install the bulb retaining ring over the

plastic base until it contacts the rear of
the socket. Lock the ring into the
socket by rotating it clockwise until
you feel a ‘‘stop.’’

3. Install the electrical connector into the

rear of the plastic base until it snaps,
locking it into position.

4. Turn the headlights on and make sure

that they work properly. If the head-
light was correctly aligned before you
changed the bulb, you should not
need to align it again.

J

Foglight Bulb Replacement

1. Remove the bulb socket from the

foglight by turning counterclockwise.

2. Disconnect the electrical connector

from the foglamp bulb.

3. Connect the electrical connector to the

new foglamp bulb.

4. Install the bulb socket in the foglamp

turning clockwise.