Locks and Security- Page 63

2003 Mazda B4000 4WD B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

3. Turn the key from the 2

(LOCK) position to 3 (OFF).

4. Cycle, eight times, rapidly (within 10 seconds) between the 3 (OFF)

position and 4 (ON).

Note:

The eighth turn must end in the 4 (ON)

position. The instrument lights in the cluster will come on for a bulb
check in the 4 (ON) position.

5. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

6. Within 20 seconds press any button on the remote entry transmitter.

Note:

If more than 20 seconds have passed you will need to start

the procedure over again.

7. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

8. Repeat Step 6 to program each additional remote entry transmitter.

9. Turn the ignition to the 3 (OFF) position after you have finished

programming all of the remote entry transmitters.

10. The doors will lock, then unlock, to confirm that the programming

mode has been exited.

Illuminated entry

The interior lamps illuminate when the remote entry system is used to
unlock the door(s) or sound the personal alarm.

The illuminated entry system will turn off the interior lights if:

the ignition switch is turned to the ON position, or

the remote transmitter lock control is pressed, or

after 25 seconds of illumination.

The dome lamp control (if equipped) must

not

be set to the OFF

position for the illuminated entry system to operate.

3

2

1

5

4

Locks and Security

63

Detailed Information for 2003 Mazda B4000 4WD B Series Owners Manual

Lists of information found in 2003 Mazda B4000 4WD B Series Owners Manual - Page 63

  • 3. Turn the key from the 2 (LOCK) position to 3 (OFF).
  • 4. Cycle, eight times, rapidly (within 10 seconds) between the 3 (OFF) position and 4 (ON).
  • 5. The doors will lock, then unlock, to confirm that the programming mode has been activated.
  • 6. Within 20 seconds press any button on the remote entry transmitter.
  • 7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.
  • 8. Repeat Step 6 to program each additional remote entry transmitter.
  • 9. Turn the ignition to the 3 (OFF) position after you have finished programming all of the remote entry transmitters.
  • the ignition switch is turned to the ON position, or • the remote transmitter lock control is pressed, or • after 25 seconds of illumination.

Related Documents for 2003 Mazda B4000 4WD B Series Owners Manual