Determining if the system is operational; WARNING: Unless serviced, the system may not function; properly in the event of a collision.- Page 87

2003 Mazda B4000 4WD B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

and the electrical wiring which connects the components.

The RCM (restraints control module) monitors its own internal circuits
and the supplemental air bag electrical system warning (including the
passenger air bag deactivation switch, the system wiring, the air bag
system readiness light, the air bag back up power and the air bag
ignitors).

Determining if the system is operational

The SRS uses readiness lights in the instrument cluster and the
passenger air bag deactivate switch or a tone to indicate the condition of
the system. Refer to the

Air bag readiness

section in the

Instrumentation

chapter or

Passenger air bag deactivate switch

section in this chapter. Routine maintenance of the air bag is not
required.

A difficulty with the system is indicated by one or more of the following:

The readiness lights will either
flash or stay lit.

The readiness lights will not
illuminate immediately after
ignition is turned on.

A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and/or light are repaired.

If any of these things happen, even intermittently, have the SRS serviced
at your authorized Mazda dealership immediately.

WARNING: Unless serviced, the system may not function
properly in the event of a collision.

Disposal of air bags and air bag equipped vehicles (including
safety belt pretensioners)

For disposal of safety belt pretensioners, air bags, or air bag equipped
vehicles, see your authorized Mazda dealership or qualified technician.
Air bags MUST BE disposed of by qualified personnel.

Seating and Safety Restraints

87

Detailed Information for 2003 Mazda B4000 4WD B Series Owners Manual

Lists of information found in 2003 Mazda B4000 4WD B Series Owners Manual - Page 87

  • and the electrical wiring which connects the components.
  • The readiness lights will either flash or stay lit.
  • The readiness lights will not illuminate immediately after ignition is turned on.
  • A series of five beeps will be heard.

Related Documents for 2003 Mazda B4000 4WD B Series Owners Manual