Owners Guide (post-2002-fmt); Recycled engine coolant; Coolant refill capacity- Page 241

2007 Mazda B4000 Truck Mazda B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

5. Fill the coolant reservoir slowly with the proper coolant mixture (see

above), to within the “COLD FILL RANGE” or the “FULL COLD”

level on the reservoir. If you removed the radiator cap in an overflow

system, fill the radiator until the coolant is visible and radiator is

almost full.

6. Replace the cap. Turn until tightly installed. (Cap must be tightly

installed to prevent coolant loss.)

After any coolant has been added, check the coolant concentration, refer

to

Checking engine coolant

. If the concentration is not 50/50

(protection to –34° F/–36° C), drain some coolant and adjust the

concentration. It may take several drains and additions to obtain a 50/50

coolant concentration.
Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.
If you have to add more than 1.0 quart (1.0 liter) of engine coolant per

month, have your authorized dealer check the engine cooling system.

Your cooling system may have a leak. Operating an engine with a low

level of coolant can result in engine overheating and possible engine

damage.

Recycled engine coolant

Not all coolant recycling processes produce coolant which meets Mazda

specification. Use of a recycled engine coolant which does not meet

Mazda specifications may harm engine and cooling system components.

Always dispose of used automotive fluids in a responsible manner.

Follow your community’s regulations and standards for recycling and

disposing of automotive fluids.

Coolant refill capacity

To find out how much fluid your vehicle’s cooling system can hold, refer

to

Maintenance product specifications and capacities

in this chapter.

Fill your engine coolant reservoir as outlined in

Adding engine coolant

in this section.

2007 B-Series (mbs)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

241

Detailed Information for 2007 Mazda B4000 Truck Mazda B Series Owners Manual

Lists of information found in 2007 Mazda B4000 Truck Mazda B Series Owners Manual - Page 241

  • 4. When you are sure that all the pressure has been released, use the cloth to turn it counterclockwise and remove the cap.
  • 5. Fill the coolant reservoir slowly with the proper coolant mixture (see above), to within the “COLD FILL RANGE” or the “FULL COLD” level on the reservoir.
  • 6. Replace the cap.
  • 1.0 quart (1.

Related Documents for 2007 Mazda B4000 Truck Mazda B Series Owners Manual