Master control switches- Page 113

2009 Mazda CX-7 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (113,1)

NOTE

(POWER WINDOW RESET PROCEDURE)

If the battery was disconnected during vehicle
maintenance, or for other reasons such as a
switch continues to be operated after the
window is fully open/close, the power windows
will not fully open and close automatically.
Resetting of the automatic function can be
performed using the driver's master control
switch or the front passenger door switch.
The power window auto function reset
procedure can be done on one or both door
switches. The power window auto function will
only resume on the side that has been reset.

1. Turn the ignition switch to the ON position.

2. Make sure that the power window lock

switch located on the driver's door is not
depressed.

3. Press the switch and fully open the power

window.

4. Pull up the switch to fully close the power

window and continue holding the switch for
about 2 seconds after the window fully
closed.

5. Repeat Steps 3-4 for each front power

window.

6. Make sure that the power windows operate

correctly using the door switches.

Two-step down function

With the power window completely
closed, press the switch lightly and it will
open and stop about 3 cm (1 in) from the
top.
If you continue to press and hold the
switch, the window will resume opening
all the way.

NOTE

Pressing the power window switch once when
the window is fully closed will only open it
about 3 cm (1 in) to allow convenient
ventilation of the cabin.

Canceling the two-step down function

To cancel the two-step down function for
the front power windows, carry out the
following procedure using the master
control switches.

1. Turn the ignition switch to the ON

position and complete the following
procedure within 5 seconds:
Press the power window switch 2 times
firmly, then pull it 2 times firmly.

Master control switches

Driver's 
window

Front passenger's 
window

2. Turn the ignition switch to the LOCK

position.

3. With the ignition switch in the LOCK

position, and within 40 seconds, turn
the ignition switch to the ON position
and complete the following procedure
within 5 seconds:
Press the power window switch 2 times
firmly, then pull 2 times firmly.

Knowing Your Mazda

Doors and Locks

3-35

CX-7_8Z60-EA-08D_Edition2 Page113
Friday, May 30 2008 5:27 PM

Form No.8Z60-EA-08D

Detailed Information for 2009 Mazda CX-7 Owners Manual

Lists of information found in 2009 Mazda CX-7 Owners Manual - Page 113

  • 1. Turn the ignition switch to the ON position.
  • 2. Make sure that the power window lock switch located on the driver's door is not depressed.
  • 3. Press the switch and fully open the power window.
  • 4. Pull up the switch to fully close the power window and continue holding the switch for about 2 seconds after the window fully closed.
  • 5. Repeat Steps 3-4 for each front power window.
  • 6. Make sure that the power windows operate correctly using the door switches.
  • 1. Turn the ignition switch to the ON position and complete the following procedure within 5 seconds: Press the power window switch 2 times firmly, then pull it 2 times firmly.
  • 2. Turn the ignition switch to the LOCK position.
  • 3. With the ignition switch in the LOCK position, and within 40 seconds, turn the ignition switch to the ON position and complete the following procedure within 5 seconds: Press the power window switch 2 times firmly, then pull 2 times firmly.

Related Documents for 2009 Mazda CX-7 Owners Manual