Appearance Care; Maintenance ; Maintenance and Care- Page 458

*

Some models.

6–66

Maintenance and Care

Appearance Care

   4.   Remove moisture with a dry, soft cloth 

and allow the leather to further dry in 

a well-ventilated, shaded area. If the 

leather gets wet such as from rain, 

remove the moisture and dry it as soon 

as possible.

   NOTE

y

  Because genuine leather is a natural 

material, its surface is not uniform and 

it may have natural scars, scratches, 

and wrinkles.

y

  To maintain the quality for as long as 

possible, periodical maintenance, about 

twice a year, is recommended.

y

  If the leather upholstery comes into 

contact with any of the following, clean 

it immediately.

  Leaving it uncleaned could cause 

premature wear, mold, or stains.

y

  Sand or dirt

y

  Grease or oil, such as hand cream

y

  Alcohol, such as in cosmetic or hair 

dressing items

y

  If the leather upholstery gets wet, 

promptly remove moisture with a dry 

cloth. Remaining moisture on the 

surface may cause deterioration such as 

hardening and shrinkage.

y

  Exposure to direct sunlight for long 

periods may cause deterioration and 

shrinkage. When parking the car under 

direct sunlight for long periods, shade 

the interior using sunshades.

y

  Do not leave vinyl products on the 

leather upholstery for long periods. 

They may affect the leather quality 

and coloring. If the cabin temperature 

becomes hot, the vinyl may deteriorate 

and adhere to the genuine leather.

           Plastic Part Maintenance

CAUTION

  Do not use polishing agents.
  Depending on the product ingredients, 
they could cause discoloration, stains, 
cracks or peeling of the coating.

           Instrument Panel Top 

Maintenance

             1.   Wipe  the  soiled  area  with  a  soft  cloth 

soaked in a mild detergent (approx. 

5%) diluted with water.

   2.   Wipe off the remaining detergent using 

a cloth soaked in clean water and 

wrung out well.

           Active Driving Display 

Maintenance 

*

            The  combiner  and  mirror  surface  have 

a special coating. When cleaning it, do 

not use a hard cloth, a cloth with a rough 

surface, or cleaning detergent. Use a 

¿

 ne-

textured, soft cloth.

  If a chemical solvent gets on the combiner 

or mirror surface, wipe it off immediately. 

Otherwise, they could be damaged and the 

surface coating could be scratched.

           Panel Maintenance

            If  a  panel  becomes  soiled,  wipe  it  off  with 

a soft cloth soaked in clean water and 

thoroughly wrung out.

  If some areas require further cleaning, use 

the following procedure:

   1.   Wipe the soiled area with a soft cloth 

soaked in a mild detergent (approx. 5 

%) diluted with water.

   2.   Wipe off the remaining detergent using 

a cloth soaked in clean water and 

wrung out well.