9–14
Speci
¿
cations
Personalization Features
Item
Feature
Factory Setting
Available
Settings
Settings
Change
Method
System
Language
Language indicated in display
English
Depends on
market
*8
A —
Temperature
Temperature unit indicated in
display
°F or °C
°F/°C
A —
Distance
Distance unit indicated in
display
mi or km
mi/km
A —
Fuel Economy Monitor
(page 4-62 )
Ending display
On/off
Off
On/Off
C
—
Fuel economy resetting
procedure
Linkage/non-linkage with fuel
economy reset and trip meter
reset
Off
On/Off
C
—
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf
¿
c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:
y
At
position: Headlights turn off immediately after the ignition is switched off.
y
At any position other than
: Headlights do not turn off after the ignition is switched off.
*6 When set to Off, the lights-on reminder is operable.
*7 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off. Refer to Lights-On Reminder on page 7-39 .
*8 Available only in display from the center display.