Before Driving; Doors and Locks- Page 86

3–16

Before Driving

Doors and Locks

 Function 

number 

 Function 

*1

 1 

 The auto door-lock function is 

disabled. 

 2 

 All the doors and the liftgate lock 

automatically when the vehicle speed 

is about 20 km/h (12 mph) or more. 

 3  (Factory 

Setting) 

 All the doors and the liftgate lock 

automatically when the vehicle speed 

is about 20 km/h (12 mph) or more. 

All the doors and the liftgate unlock 

when the ignition is switched from 

ON to Off. 

 4 

 When the ignition is switched ON 

and the selector lever is shifted from 

park (P) to any other gear position, 

all the doors and the liftgate lock 

automatically. 

 5 

 When the ignition is switched ON 

and the selector lever is shifted from 

park (P) to any other gear position, 

all the doors and the liftgate lock 

automatically.

  When the selector lever is shifted to 

park (P) while the ignition is switched 

ON, all the doors and the liftgate 

unlock automatically. 

 6 

 All the doors and the liftgate lock 

automatically when the vehicle speed 

is about 20 km/h (12 mph) or more.

  When the selector lever is shifted to 

park (P) while the ignition is switched 

ON, all the doors and the liftgate 

unlock automatically. 

     *1   Other settings for the auto door lock function are 

available at an Authorized Mazda Dealer. For 

details consult an Authorized Mazda Dealer. Refer 

to Personalization Features on page  9-10 .

  Settings can be changed using the 

following procedure.

   1.   Safely park the vehicle. All doors must 

remain closed.

   2.   Switch  the  ignition  ON.

   3.   Press and hold the lock side of the 

driver's door-lock switch within 20 

seconds of switching the ignition ON, 

and make sure a beep sound is heard 

about eight seconds afterwards.

   4.   Refer to the auto lock/unlock function 

setting table, determine the function 

number for the desired setting. Press 

the unlock side of the driver's door-lock 

switch the same number of times as the 

selected function number (Ex. If you 

select function 2, press the unlock side 

of the switch only 2 times).

   5.   Three seconds after the function setting 

has been changed, a beep sound will 

beep in the amount of the selected 

function number. (Ex. Function number 

3 = 3 beep sounds)

Press unlock side of 
lock switch once

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Press 4 times

Function Number 3

Press 5 times

Function Number 4

Press 7 times

Function Number 5

Press 6 times

Function Number 6

Cancel setting

Cancel setting

Function set (The 
number of beeps 
heard is the same as 
the selected function 
number) 

Press lock side of  
lock switch

Wait for 3 second

   NOTE

y

  The doors cannot be locked or unlocked 

while the setting function is being 

performed.

y

  The procedure can be cancelled by 

pressing the lock side of the driver's 

door-lock switch.