Memory seat switch; FOLDING REAR SEATS; RETURNING REAR SEATS TO UPRIGHT POSITION:- Page 9

m{zd{ 

cx-3

7

FOLDING REAR SEATS

Push the button to fold down the seatback.  
(Left rear seat release is shown.)

NOTE:

 For tall drivers and front passengers who adjust the 

front seats all the way back, the headrests on the rear seats 
need to be removed when folding the rear 
seatbacks down. If not removed, the rear 
headrest will push into the front seatback. 
In order to remove the headrest from 
 the rear seat, the seatback needs to  
be tilted slightly forward.

RETURNING REAR SEATS TO UPRIGHT POSITION:

1 

Install the headrest (if removed).

2 

Raise the seatbacks until they lock into position.

3 

 Pull on the top of the seatbacks to make sure they are locked.

4 

 Check that all seat belts are routed properly for passenger use.

MEMORY SEAT SWITCH (IF EQUIPPED) 

To Program the Driver’s Seat and Active Driving Display 

position/brightness Memory Position.

1 

Turn the ignition switch off.

2 

 Adjust seat to the desired position using the slide/tilt and 

recline switches. Adjust the Active Driving Display position/
brightness using the MAZDA CONNECT settings. Push and 
hold the memory seat SET button until a beep is heard.

3 

Within 5 seconds: 

•   To program a memory seat button, push and hold memory button 1 or 2 until a beep 

sound is heard.

•  To program a key, push and hold the key unlock button  until a beep sound is heard 

(two registered keys can be programmed).

Unlocked

Locked

Memory seat switch

SEATS

FUEL ECONOMY: 

To achieve the best fuel economy, visit

www.fueleconomy.gov

for more information.

2940109_18b CX-3 SSG_060817.indd   7

6/8/17   2:38 PM