When Driving; Setting the System- Page 237

NOTE

In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.



You are driving your vehicle at the same speed as the vehicle ahead.



Directly after the MRCC with Stop & Go function system has been set.



Directly after the accelerator pedal is released.



Another vehicle cuts into the driving lane.

▼

Setting the System

The MRCC with Stop & Go function system operates when all of the following conditions
are met.



Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)



The MRCC with Stop & Go function is turned on.



The brake pedal is not depressed.



The electric parking brake (EPB) is released (electric parking brake (EPB) indicator light
is turned off).



There is no problem with the DSC.



All the doors are closed.



The driver's seat belt is fastened.



The selector lever is in the drive (D) position or manual (M) position (manual mode).

NOTE



In the following cases, the MRCC with Stop & Go function system is canceled when the
vehicle is traveling at 30 km/h (20 mph) or less and “MRCC Disabled under 30 km/h (20
mph)” is displayed in the active driving display.



The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
with the Forward Sensing Camera (FSC) or windshield is dirty).



There is a problem with the stop hold control function.



There is a problem with the electric parking brake (EPB).



It may not be possible to set the MRCC with Stop & Go function system directly after
starting the engine, while the DSC operation is being checked.

When Driving

i-ACTIVSENSE

4-107

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00