Before Driving- Page 88

(With the advanced keyless function)

A beep sound will be heard once.
 
To confirm that all doors and the liftgate
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound.

NOTE



The doors and the liftgate can be locked
by pressing the lock button while any
other door or the liftgate is open. The
hazard warning lights will not flash.
When the lock button is pressed while
any door is open and then the door is
closed, all the doors and the liftgate are
locked.



Confirm that all doors and the liftgate
are locked visually or audibly by use of
the double click.



Make sure all doors and the liftgate are
locked after pressing the button.



(With theft-deterrent system)

When the doors are locked by pressing
the lock button on the key while the
theft-deterrent system is armed, the
hazard warning lights will flash once to
indicate that the system is armed.

Unlock button

To unlock the driver's door, press the
unlock button and the hazard warning
lights will flash twice.

(With the advanced keyless function)

A beep sound will be heard twice.
 
To unlock all doors and the liftgate, press
the unlock button again within three

seconds and two more beep sounds will be
heard.

NOTE



The system can be set to unlock all
doors by performing a single operation.
Refer to Personalization Features on
page 9-9.
Use the following procedure to change
the setting.
1. Switch the ignition off and close all

of the doors and the liftgate.

2. Open the driver's door.
3. Within 30 seconds of opening the

driver's door, press and hold the
UNLOCK button on the key for 5
seconds or longer (the sound of the
doors locking/unlocking can be
heard).
After this, the system switches the
setting each time the UNLOCK
button is pressed (the sound of the
doors locking/unlocking can be
heard).

4. The setting change is completed by

doing any one of the following:



Switching the ignition to ACC or
ON.



Closing the driver's door.



Opening the liftgate.



Not operating the key for ten
seconds.



Pressing any button except the
UNLOCK button on the key.



Pressing a request switch.



(Auto re-lock function)

Before Driving

Keys

3-6

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00