Automatic open/close stop function; Stopping the liftgate; Moving the liftgate again- Page 114

Automatic open/close stop function

The liftgate can be stopped at a
desired position while it is opening/
closing automatically.

Stopping the liftgate

If any of the following operations is
done while the liftgate is opening/
closing automatically, the liftgate is
stopped.



The power liftgate button on the
transmitter is pressed.



The power liftgate switch is pressed.



The electric liftgate opener on the
liftgate is pressed.



The power liftgate close switch is
pressed.



(With the advanced keyless
function)

The door-lock switch on the liftgate
is pressed.

NOTE

The liftgate cannot be stopped in the
area about 20 cm (7.9 in) away from
the fully-closed position. It moves in
the close direction by the load weight
of the liftgate itself.

Moving the liftgate again

If any of the following operations is
done, the liftgate moves in the
direction opposite to the direction it
was moving before it stopped.



The power liftgate button on the
transmitter is pressed for about 1
second or longer.



The power liftgate switch is pressed
for about 1 second or longer.



The electric liftgate opener on the
liftgate is pressed.



The power liftgate close switch is
pressed.

(With the advanced keyless function)

When the door-lock switch on the
liftgate is pressed, the liftgate
automatically closes.

Changing the power liftgate fully
open position

The power liftgate fully-open position
can be changed according to the
height of a garage.

When changing the position

1. Stop the liftgate at the desired

position.

2. Press the power liftgate close switch

for about three seconds.
A beep sound is activated two
times to indicate that the position
change has been completed.

NOTE

Set the desired fully-open position of
the liftgate at the position where it is
open more than halfway. The position
where it is less than halfway open
cannot be set.

To reset

1. Open the liftgate.
2. Press the power liftgate close switch

for about seven seconds.
A beep sound is activated three
times to indicated that the reset has
been completed.

NOTE

After about 3 seconds have elapsed
since the switch was pressed, a beep
sound is activated 2 times to indicate
that the liftgate fully-open position has
changed. Continuously press the
switch for about 7 seconds to
complete the reset.

Before Driving

Doors and Locks

3-26

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09