Outside Temperature Display; Changing the Temperature Unit of the- Page 165



When the illumination dimmer is
canceled, the screen in the center
display switches to constant display
of the daytime screen.

▼

Outside Temperature Display

When the ignition is switched ON, the
outside temperature is displayed.
 

NOTE



Under the following conditions, the
outside temperature display may
differ from the actual outside
temperature depending on the
surroundings and vehicle conditions:



Significantly cold or hot
temperatures.



Sudden changes in outside
temperature.



The vehicle is parked.



The vehicle is driven at low speeds.

Changing the Temperature Unit of the
Outside Temperature Display

The outside temperature unit can be
switched between Celsius and
Fahrenheit.
Settings can be changed by operating
the center display screen.
Refer to the Settings section in the
Mazda Connect Owner's Manual.

▼

Distance-to-empty

This displays the approximate distance
you can travel on the remaining fuel
based on the fuel economy.
The distance-to-empty will be
calculated and displayed every second.
 

NOTE



Even though the distance-to-empty
display may indicate a sufficient
amount of remaining driving distance
before refueling is required, refuel as
soon as possible if the fuel level is
very low or the low fuel warning light
illuminates.



The display will not change unless
you add more than approximately 9
L (2.3 US gal, 1.9 Imp gal) of fuel.



The distance-to-empty is the
approximate remaining distance the
vehicle can be driven until all the
graduation marks in the fuel gauge
indicating the remaining fuel supply
disappear.



If there is no past fuel economy
information such as after first
purchasing your vehicle or the
information is deleted when the
battery cables are disconnected, the
actual distance-to empty/range may
differ from the amount indicated.

When Driving

Instrument Cluster and Display

4-19

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09