Blind Spot Monitoring (BSM); Blind Spot Monitoring; Canceling the System- Page 242

▼

Canceling the System

The LDWS can be set to inoperable.



(If only the LDWS is turned off)

Refer to the Settings section in the
Mazda Connect Owner's Manual.



(If the LDWS is turned off by
operating the i-ACTIVSENSE OFF
switch)

Refer to i-ACTIVSENSE OFF Switch
on page 4-89.

NOTE

If the ignition is switched OFF while
you have canceled the system using the
i-ACTIVSENSE OFF switch, the system
is automatically enabled the next time
the ignition is switched ON. However,
if the system is canceled using the
personalization features, the system is
not automatically enabled.

Blind Spot Monitoring

(BSM)

*

▼

Blind Spot Monitoring (BSM)

The BSM is designed to assist the driver
in checking the area to the rear of the
vehicle on both sides during lane
changes by notifying the driver of the
presence of vehicles approaching from
the rear in an adjacent lane.

BSM operation

The BSM detects vehicles approaching
from the rear while traveling in the
forward direction at a speed of 10
km/h (6.3 mph) or faster and notifies
the driver by turning on the BSM
warning indicator light and displaying
the vehicle detection screen.
If the turn signal lever is operated to
signal a turn in the direction in which
the BSM warning indicator light is
illuminated while the approaching
vehicle is detected, the BSM notifies
the driver of possible danger flashing
on the BSM warning indicator light,
and by activating the warning sound
and the warning screen indicator
display.
The detection area on this system
covers the driving lanes on both sides
of the vehicle and from the rear part of
the front doors to about 50 m (164 ft)
behind the vehicle.

1. Your vehicle

When Driving

i-ACTIVSENSE

4-96

*Some models.

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09