When Driving- Page 244



A vehicle is in the detection area at
the rear in an adjacent driving lane
but it does not approach. The BSM
determines the condition based on
radar detection data.



A vehicle is traveling alongside
your vehicle at nearly the same
speed for an extended period of
time.



Vehicles approaching in the
opposite direction.



A vehicle in an adjacent driving
lane is attempting to pass your
vehicle.



A vehicle is in an adjacent lane on
a road with extremely wide driving
lanes. The detection area of the
rear side radar sensor is set at the
road width of expressways.



In the following case, the flashing of
the BSM warning indicator light, and
the activation of the warning sound
and the warning screen indicator
display may not occur or they may be
delayed.



A vehicle makes a lane change
from a driving lane two lanes over
to an adjacent lane.



Driving on steep slopes.



Crossing the summit of a hill or
mountain pass.



When there is a difference in the
height between your driving lane
and the adjacent lane.



Directly after the BSM system
becomes operable by changing the
setting.



If the road width is extremely
narrow, vehicles two lanes over may
be detected. The detection area of
the rear side radar sensor is set
according to the road width of
expressways.



The BSM warning indicator light may
turn on and the vehicle detection
screen may be displayed in the
display in reaction to stationary
objects (guardrails, tunnels,
sidewalls, and parked vehicles) on
the road or the roadside.

1. Objects such as guardrails and

concrete walls running alongside
the vehicle.

1. Places where the width between

guardrails or walls on each side of
the vehicle narrows.

When Driving

i-ACTIVSENSE

4-98

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09