Setting the System; Turning on the system- Page 278

▼

Setting the System

The MRCC with Stop & Go function system operates when all of the following
conditions are met.



Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)



The MRCC with Stop & Go function is turned on.



The brake pedal is not depressed.



The parking brake is released (Electric Parking Brake (EPB) indicator light is turned
off).



There is no problem with the DSC.



All the doors are closed.



The driver's seat belt is fastened.



The selector lever is in the drive (D) position or manual (M) position (manual
mode).

NOTE



In the following cases, the MRCC with Stop & Go function system is canceled
when the vehicle is traveling at 30 km/h (20 mph) or less and “Mazda Radar
Cruise Control Disabled Under 30 km/h” is displayed in the multi-information
display.



The Forward Sensing Camera (FSC) cannot detect target objects (There is
problem with the Forward Sensing Camera (FSC) or windshield is dirty).



There is a problem with the stop hold control function.



There is a problem with the Electric Parking Brake (EPB).



It may not be possible to set the MRCC with Stop & Go function system directly
after starting the engine, while the DSC operation is being checked.

Turning on the system

1. CANCEL switch
2. RES switch
3. MRCC switch
 

When Driving

i-ACTIVSENSE

4-132

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09