Air intake selector switch; Recirculated air position (; Outside air position (- Page 398

Air intake selector switch

Outside or recirculated air positions
can be selected. Press the switch to
select outside/recirculated air
positions.

Recirculated air position (

)

Outside air is shut off. Use this position
when going through tunnels, driving in
congested traffic (high engine exhaust
areas) or when quick cooling is
desired.

Outside air position (

)

Outside air is allowed to enter the
cabin. Use this mode for ventilation or
windshield defrosting.

WARNING

Do not recirculate the air in the cabin
during cold or rainy weather:

Recirculating the air in the cabin during
cold and rainy weather is dangerous as
it will cause the windows to fog up.
Your vision will be hampered, which
could lead to a serious accident.

SYNC (Synchronized Temperature)
switch

Use the SYNC switch to change the
mode between the individual
operation (driver and passenger) and
interconnection (simultaneous)
modes.

Interconnection mode (indicator light
turns on)

The set temperature for the driver and
front passenger is controlled
simultaneously.

Individual operation mode (indicator
light turns off)

The set temperature can be controlled
individually for the driver and front
passenger.

Windshield defroster switch

Press the switch to defrost the
windshield and front door windows.
Refer to Windshield Defrosting and
Defogging on page 5-13.

Rear window defogger switch

Press the rear window defogger switch
to defrost the rear window.
Refer to Rear Window Defogger on
page 4-55.

▼

Operation of Automatic Air
Conditioner

1. Press the AUTO switch. Selection of

the airflow mode, air intake
selector and amount of airflow will
be automatically controlled.

2. Use the temperature control dial to

select a desired temperature.
If you want to set the temperature
on the front passenger's side
separately from the driver's side,
turn the front passenger
temperature control dial to switch
the mode automatically to the
individual operation mode and set
the temperature for the front
passenger's side.

To turn off the system, press the power
switch.

NOTE



Set the control dial to the
recommended temperature of 22 °C
(72 °F), and then adjust it as desired.



Setting the temperature to maximum
hot or cold will not provide the
desired temperature at a faster rate.

Interior Features

Climate Control System

5-12

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09