SKYACTIV-G 2.0 and SKYACTIV-G; SKYACTIV-G 2.5T- Page 450

NOTE

Changing the coolant should be done
by an Authorized Mazda Dealer.

Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year

―

at the beginning of

the winter season

―

and before

traveling where temperatures may drop
below freezing.
 
Inspect the condition and connections
of all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
 
The coolant should be at full in the
radiator and between the FULL and
LOW marks on the coolant reservoir
when the engine is cool.

SKYACTIV-G 2.0 and SKYACTIV-G
2.5

SKYACTIV-G 2.5T

If it is at or near LOW, add enough
coolant to the coolant reservoir to
provide freezing and corrosion
protection and to bring the level to
FULL.
Securely tighten the coolant reservoir
tank cap after adding coolant.

CAUTION



Radiator coolant will damage paint.
Rinse it off quickly if spilled.



If the “FL22” mark is shown on or
near the cooling system cap, use of
FL-22 is recommended when
replacing engine coolant. Using
engine coolant other than FL-22 may
cause serious damage to the engine
and cooling system.

If the coolant reservoir is empty or new
coolant is required frequently, consult
an Authorized Mazda Dealer.

Maintenance and Care

Owner Maintenance

6-20

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09