Replacing the fuses under the hood; the same amperage rating- Page 466

3. Pull the fuse straight out with the

fuse puller provided on the fuse
block located in the engine
compartment.

4. Inspect the fuse and replace it if it is

blown.

1. Normal
2. Blown
 

5. Insert a new fuse of the same

amperage rating, and make sure it
fits tightly. If it does not fit tightly,
have an expert install it. Consult an
Authorized Mazda Dealer.
If you have no spare fuses, borrow
one of the same rating from a
circuit not essential to vehicle
operation, such as the audio or
accessory socket circuit.

CAUTION

Always replace a fuse with a
genuine Mazda fuse or equivalent
of the same rating. Otherwise, you
may damage the electric system.

6. Reinstall the cover and make sure

that it is securely installed.

Replacing the fuses under the hood

If the headlights or other electrical
components do not work and the fuses
in the cabin are normal, inspect the
fuse block under the hood.
If a fuse is blown, it must be replaced.
Follow these steps:
 
1. Make sure the ignition is switched

off, and other switches are off.

2. Remove the fuse block cover.

3. If any fuse but the MAIN fuse is

blown, replace it with a new one 

of

the same amperage rating

.

1. Normal
2. Blown
 

Maintenance and Care

Owner Maintenance

6-36

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09