Traction Control System ; Low Engine Oil Pressure; Traction Control System - Page 7

2013 Mazda CX-5 Cx 5 Smart Start Guide

Model Year
2014 Dodge Charger SRT Owner Manual
background image

11

12

SHIFT POSITION 

INDICATOR LIGHT

SPEEDOMETER

DASHBOARD 

ILLUMINATION/ 

DIMMER

1

/

TRIP METER

2

 

GLOSSARY OF WARNING AND INDICATOR LIGHTS

NOTE:

 

See Owner’s Manual for more details and explanations.

1

 • Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.

2

 • Push to toggle between trip meter (A & B).

 • 

 

When a trip meter is selected, push and hold to reset to zero.

Instrument Cluster

NOTE:

 

Low ambient temperature and/or high altitude causes tire pressures to drop and 

may turn the TPMS warning light on. If the warning light comes on, check the tire pressure 

and fill the tires as soon as possible, preferably before moving the vehicle and warming up 

the tires. Tire pressure should be checked when the tires are cold.

www.MazdaUSA.com

TCS

OFF

 

 

Traction Control System 

(TCS) Off Indicator Light

 

 

Low Engine Oil Pressure

 

 

Traction Control System  

(TCS)/Dynamic Stability  

Control (DSC)

 

On: TCS/DSC malfunction  

Flashing: TCS/DSC operating

 

 

Shift Position Indicator Light

 

 

KEY Warning Light 

RED

 

 

KEY Indicator Light 

GREEN

 

 

Power Steering Malfunction

 

 

Air Bag/Front Seat Belt 

Pretensioner System 

Malfunction

 

 

Turn Signals/Hazard  

Warning Indicator Lights

4WD

 

 

4WD Warning Light

 

On:  

Flashing: Stop vehicle/tow to  

Mazda dealer.

 

 

Check Engine Light

 

 

Master Warning Light

 

 

Tire Pressure  

Monitoring System  

(TPMS

) Warning Light

 

On/Warning Beep: Low tire  

pressure in one or more tires.  

Flashing: TPMS Malfunction

 

 

Security Indicator Light

 

 

Cruise Main Indicator Light  

On (

AMBER

)/Cruise Set 

Indicator Light On (

GREEN

)

 

 

Automatic Transaxle  

Warning Light

 

 

Lights On (Exterior) 

BSM

OFF

 

 

BSM OFF 

(Blind Spot Monitoring)

 

 

Seat Belt  

Unbuckled/Malfunction

 

 

Headlight High Beams On

 

 

Brake Warning Light

 

Parking brake on/low brake  

fluid/malfunction

AFS

OFF

 

 

Adaptive Front Lighting 

System (AFS) OFF

 

 

Charging System  

Malfunction

 

 

Door/Liftgate Ajar

 

 

Low Washer Fluid Level 

Warning Light

 

 

ABS (Antilock Brake  

System) Malfunction

 

 

Low Fuel Level

 

 

Check Fuel Cap 

TACHOMETER

FUEL  

GAUGE

ODOMETER/ 

TRIP METER

ENGINE COOLANT TEMP LIGHTS  

Since this vehicle does not use an engine coolant 
temperature gauge, red and blue engine coolant 
temperature lights are used to indicate high and low 
coolant temperature.

 

Red Coolant Temp Light

 

Flashing:

 Engine is starting to run hot. Drive  

 

slowly to reduce engine load. 

 

On:

 Engine is overheating. Safely pull over to  

 

the side of the road and turn the engine off.  

 

Refer to the Owner’s Manual for more information.

 

Blue Coolant Temp Light

 

On:

 Engine coolant is cold and no warm air is  

 

available for heater/defroster. 

 

Off:

 Engine coolant is warm and warm air is  

 

available for heater/defroster.  

 

The light may stay on for a few minutes after  

 

start-up when the engine is cold, but the  

 

vehicle can be driven with the light on or off.

INFORMATION 

DISPLAY

AMBIENT 

TEMPERATURE

IMPORTANT:

 

When your 

display setting is set on “AUTO”, 

the instrument cluster and 

display may become dimmer 

when the headlights are on. 

If the display and instrument 

cluster become too dim or too 

bright when the headlights are 

on, simply rotate the dimmer 

knob located on your instrument 

cluster to adjust the brightness.

See page 8 or the 
Owner’s Manual for 
further information.

Detailed Information for 2013 Mazda CX-5 Cx 5 Smart Start Guide

Lists of information found in 2013 Mazda CX-5 Cx 5 Smart Start Guide - Page 7

  • Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.
  • Push to toggle between trip meter (A & B).
  • When a trip meter is selected, push and hold to reset to zero.

Related Documents for 2013 Mazda CX-5 Cx 5 Smart Start Guide