Rear Seat; Split Folding; Essential Safety Equipment- Page 23

NOTE



If there is no driving position movement,
a beep is not heard.



The driving position adjustment is
canceled in the following cases:



Any of the seat adjustment switches is
operated.



The SET button is pressed.



Programming button 1 or 2 is pressed.



The key   button or   button is
operated.



The vehicle starts moving.



The active driving display is adjusted.

Erasing programmed driving positions

(Erasing the driving positions
programmed to the key)

1. Switch the ignition OFF.
2. Press the SET button on the side of the

seat until a beep sound is heard one
time.

3. After the beep sounds, press the key 

button within 5 seconds until a beep
sound is heard one time.

NOTE

If a beep sound is heard three times, the
operation is canceled.

Rear Seat

▼

Split Folding

By lowering the rear seatbacks the luggage
compartment space can be expanded.

WARNING

Tightly secure cargo in the luggage
compartment when it is transported with
the seatbacks folded down:

Driving without tightly securing cargo and
luggage is dangerous as it could move and
become an obstruction to driving during
emergency braking or a collision resulting
in an unexpected accident.

CAUTION

If the seatback is not supported by your
hand, it will move suddenly and could
cause injury.

Folding both seatbacks down

CAUTION

Check the position of a front seat before
folding a rear seatback. Depending on the
position of a front seat, it may not be
possible to fold a rear seatback all the way
down because it may hit the seatback of
the front seat which could scratch or
damage the front seat or its pocket. Lower
or remove the head restraint on the rear
outboard seat if necessary.

Essential Safety Equipment

Seats

2-9

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26