Before Driving; Operation from outside (To close); Changing the power liftgate fully open- Page 115

Operation from outside (To close)

Press the power liftgate close switch while
the liftgate is fully opened. The hazard
warning lights flash twice and the liftgate
closes automatically after the beep sound
is heard.

Power liftgate 
close switch

NOTE

If the power liftgate switch/power liftgate
close switch is pressed or the electric
liftgate opener is operated while the
liftgate is opening/closing electrically, the
beep sound is heard and the liftgate stops.
Then, it reverses when any of the switches
are pressed again.

Changing the power liftgate fully open
position

The power liftgate fully-open position can
be changed according to the height of a
garage.

When changing the position

1. Stop the liftgate at the desired position.
2. Press the power liftgate close switch

for about three seconds.
A beep sound is activated two times to
indicate that the position change has
been completed.

NOTE

Set the desired fully-open position of the
liftgate at the position where it is open
more than halfway. The position where it
is less than halfway open cannot be set.

To reset

1. Open the liftgate.
2. Press the power liftgate close switch

for about seven seconds.
A beep sound is activated three times
to indicated that the reset has been
completed.

NOTE

After about 3 seconds have elapsed since
the switch was pressed, a beep sound is
activated 2 times to indicate that the
liftgate fully-open position has changed.
Continuously press the switch for about 7
seconds to complete the reset.

Jam-safe equipment

While the power liftgate is opening/
closing electrically and the system detects
a person or an object in the liftgate's path,
the liftgate will move in the reverse
direction automatically and stops.

Before Driving

Doors and Locks

3-25

CX-5_8HE3-EA-18I_Edition1

2018-6-29 13:44:47