When Driving; Operating the HomeLink System; Reprogramming the HomeLink- Page 245

NOTE

If programming a garage door opener or
gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.

While the indicator light is flashing in
amber, press the button on the hand-held
transmitter for 2 seconds and release it
repeatedly until the indicator light changes
from amber to green.
Go back to Step 4 of Programming the
HomeLink System to complete the
procedure.

▼

Operating the HomeLink System

Press the programmed HomeLink button
to operate a programmed device.

▼

Reprogramming the HomeLink
system

To program a device to HomeLink using a
HomeLink button previously trained,
follow these steps:
1. Press and hold the desired HomeLink

button. 

DO NOT

 release the button.

2. After 20 seconds, the indicator light

flashes in amber. After the indicator
light flashes, release the HomeLink
button.

3. Go back to Step 2 of Programming the

HomeLink System to complete the
procedure.

NOTE

If the programming has not been
completed, the system returns to the
previous programming.

▼

Erasing Programmed HomeLink
Buttons

NOTE



All of the programmed HomeLink
buttons are reset. Individual buttons
cannot be reset, however, individual
buttons can be reprogrammed. For
individual button reprogramming, refer
to Reprogramming the HomeLink
System (page 4-91).



Verify that the programming has been
erased if you resell the vehicle.

1. Press the two outer HomeLink buttons

continuously at the same time until the
indicator light flashes.

HomeLink button 1

HomeLink button 3

2. Stop pressing the HomeLink buttons.

▼

Garage Door Two-Way
Communication

The garage door two-way communication
is a function that communicates with the
garage door opener and indicates whether
the garages door is open or closed using
the indicator lights in the rear view mirror.
It can indicate the status of the garage door
within a range up-to 250 m (820 ft).

NOTE

The communication range may shorten
depending on obstructions.

When Driving

Switches and Controls

4-91

CX-5_8HE3-EA-18I_Edition1

2018-6-29 13:44:47