Mazda Dealer.- Page 31
2013 Mazda CX-9 Cx 9 Maintenance Schedule
Table of Contents
Black plate (515,1)
2. Remove the cover.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
Taillights (Liftgate side)
Reverse lights
5. Install the new bulb in the reverse order
of the removal procedure.
NOTE
To replace the bulb, contact an Authorized
Mazda Dealer.
License plate lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens,
and then remove the lens by carefully
prying on the edge of the lens with a
flathead screwdriver.
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.
Maintenance and Care
Owner Maintenance
8-47
CX-9_8CM9-EA-12I_Edition1 Page515
Thursday, September 13 2012 2:40 PM
Form No.8CM9-EA-12I
Detailed Information for 2013 Mazda CX-9 Cx 9 Maintenance Schedule
Lists of information found in 2013 Mazda CX-9 Cx 9 Maintenance Schedule - Page 31
- 2. Remove the cover.
- 3. Turn the socket and bulb assembly counterclockwise and remove it.
- 4. Disconnect the bulb from the socket.
- 5. Install the new bulb in the reverse order of the removal procedure.
- 1. Make sure the ignition is switched off, and the headlight switch is off.
- 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with a flathead screwdriver.
- 3. Disconnect the bulb by pulling it out.
- 4. Install the new bulb in the reverse order of the removal procedure.
Related Documents for 2013 Mazda CX-9 Cx 9 Maintenance Schedule
All trademarks are property of their respective owners. Tightrope
Interactive