Owner Maintenance; Maintenance and Care; Front turn signal lights- Page 461

6–49

Maintenance and Care

Owner Maintenance

4.  Pull the center of each plastic retainer 

and remove the retainers, and then 

partially peel back the mudguard.

Removal

Installation

5.  Disconnect the wiring harness by 

releasing the clamp.

6.  Turn the socket and bulb assembly 

counterclockwise and remove it.

7.  Disconnect the bulb from the socket.

Front turn signal lights

Parking lights/Front side-marker 

lights

8.  Install the new bulb in the reverse order 

of the removal procedure.

NOTE

There will be no problem with 

functionality with the wiring harness 

disconnected in Step 5 left disconnected.

Therefore, there is no need to connect the 

wiring harness.

CX-9_8FD6-EA-16B_Edition3.indb   49

2016/03/18   11:51:15