Owner Maintenance; Maintenance and Care; Luggage compartment light- Page 467

6–55

Maintenance and Care

Owner Maintenance

Luggage compartment light
(LED type)

The LED bulb cannot be replaced as a 

single unit because it is an integrated unit.

The LED bulb has to be replaced with the 

unit. We recommend an Authorized Mazda 

Dealer when the replacement is necessary.

(Bulb type)

1.  Wrap a small flathead screwdriver 

with a soft cloth to prevent damage to 

the lens and remove the lens unit by 

carefully prying on the edge of the lens 

unit with the flathead screwdriver.

2.  Disconnect the electrical connector 

from the bulb by pressing the tab on the 

connector with your finger and pulling 

the connector.

CAUTION

When replacing the bulb always 

disconnect the connector first. 

Otherwise, electric and electronic 

devices could be shorted.

3.  Insert the flathead screwdriver into the 

gap between the lens and the lens unit, 

and then slide the screwdriver to detach 

the lens.

4.  Disconnect the bulb by pulling it out.

5.  Install the new bulb in the reverse order 

of the removal procedure.

CX-9_8FD6-EA-16B_Edition3.indb   55

2016/03/18   11:51:21