31
Turning BSM System Off
Turning the BSM system off will turn off both the light
and sound indicators. To manually turn the BSM
system off, push the BSM OFF switch on the dash.
The BSM OFF indicator in the instrument cluster will
turn on to indicate when the BSM system is off. The
BSM system will automatically turn on the next time the vehicle is started.
• If your vehicle speed is 6 mph or more, the BSM will warn you of vehicles
in the detection area by illuminating the BSM warning lights located on the
left and right door mirrors.
• If you operate a turn signal in the direction of an illuminated BSM
warning light, the system will also warn you with a beep (depending on
personalization setting) and warning light flash.
• BSM sensors are located under the left and right rear bumper areas.
The BSM system may not operate properly if the rear bumper is dirty, so
keep the rear bumper area clean and free of bumper stickers.
Blind Spot Monitoring System
BLIND SPOT MONITORING (BSM)
The BSM system is designed to assist the driver by monitoring blind
spots on the left and right sides of the vehicle in certain situations, such as
lane changes.
Your Vehicle
Detection Areas
Refer to your
Owner’s Manual for
complete details.
NOTE:
• The BSM can assist the driver in
confirming the safety of the surroundings,
but is not a complete substitute.
• The driver is responsible for ensuring safe
lane changes and other maneuvers.
• Always pay attention to the direction in
which the vehicle is traveling and the
vehicle’s surroundings.
• The BSM does not operate when the
vehicle speed is lower than about 6 mph.
WARNING:
BSM is only a
supplementary system to help
aid in monitoring blind spots;
however, BSM has limitations. The
system may not detect all vehicles,
especially a motorcycle. Do not rely
solely on the BSM. Relying solely on
the BSM may cause an unexpected
accident resulting in death or serious
injury. Make sure to look over your
shoulder before changing lanes.
2665926_17a_Mazda_CX-9_SSG_080416.indd 31
8/4/16 11:33 PM